Image 1 of 5 · Select the main image to enlarge.
Wholesale 50ml Round Glass Perfume Bottle
In the travel fragrance sector, the primary failure point is the “evaporation-leakage cycle” caused by cabin pressure changes. A standard atomizer often fails at high altitudes due to substandard seal tolerances. At STDBOTTLE , our Model PB-GL-417 is engineered as a professional-grade refillable atomizer that maintains hermetic integrity under fluctuating atmospheric conditions.
- Product number
- PB-GL-417
- Capacity
- 50ml
- Shape
- Round
- Material
- Glass
- Neck
- 15mm Screw Neck
Product description
In the travel fragrance sector, the primary failure point is the “evaporation-leakage cycle” caused by cabin pressure changes. A standard atomizer often fails at high altitudes due to substandard seal tolerances. At STDBOTTLE, our Model PB-GL-417 is engineered as a professional-grade refillable atomizer that maintains hermetic integrity under fluctuating atmospheric conditions.
By utilizing a calibrated 15mm bayonet crimp neck, this 30ml vessel transitions from a simple container to a high-performance travel accessory, ensuring the consumer’s “on-the-go” experience is unmarred by wasted formulation.
I. Technical Specifications & Mechanical Calibrations
The PB-GL-417 series features a geometric square profile designed for maximum space efficiency in travel kits, combined with a reinforced heavy base for upright stability.
- Model Identification: PB-GL-417
- Nominal Capacity: 50ml
- Caliber: 15mm Bayonet (Standard Crimp Neck)
- Vessel Body Height: 60mm
- Total Profile Height: 80mm (Including standard square cap)
- Vessel Width: 45mm
- Glass Purity: High-clarity optical grade with superior refractive index.
II. Pressure Resilience: The Bayonet Crimp Advantage
For “on-the-go” fragrance products, screw-neck bottles pose a significant risk of loosening due to vibration or pressure shifts. Our 15mm bayonet finish solves this:
- Permanent Seal: The crimp-on mechanism creates a mechanical lock between the pump gasket and the glass rim.
- TSA Compliance: Optimized for the 30ml threshold, making it the ideal volume for carry-on fragrance lines.
- High-Concentration Protection: The inert glass surface prevents the oxidation of expensive oils, preserving the scent’s top notes even during extended travel.
III. Performance Comparison: PB-GL-417 vs. Standard Travel Atomizers
| Feature | STDBOTTLE PB-GL-417 Travel Series | Standard Plastic/Glass Atomizers |
| Seal Mechanism | 15mm Professional Crimp | Screw-top or Press-fit |
| Leakage Risk | Zero (Pressure Tested) | High (Prone to evaporation) |
| Wall Thickness | Reinforced Glass | Thin Glass or Polypropylene |
| Chemical Stability | Inert (Non-reactive) | Risk of scent-shifting (Plastic) |
| Market Positioning | Luxury Travel / Boutique Gift | Disposable / Low-end Wholesale |
Custom Mold & OEM/ODM Services
Turn Your Vision into a Signature Fragrance Vessel
At STDBOTTLE, we understand that a unique bottle is the soul of a fragrance brand. As a leading perfume bottle manufacturer, we provide a comprehensive Custom Mold Service that transforms your creative concepts into high-precision glass reality. Our engineering team specializes in complex geometries and heavy-base designs, ensuring your packaging stands out in the luxury market.
Our Bespoke Manufacturing Process:
- Phase 1: Concept & 3D Design – We work with your sketches or CAD files to create optimized 3D renderings, ensuring aesthetic beauty and industrial feasibility.
- Phase 2: Rapid Prototyping – Before mass production, we provide physical samples or 3D-printed models to verify hand-feel, light refraction, and proportions.
Why Partner with STDBOTTLE for Customization?
- Unmatched Precision: Every custom vessel is engineered to fit global FEA pump standards perfectly, eliminating leakage risks.
- Super Flint Glass Clarity: We use only the highest grade materials to ensure your custom design has the crystal-like transparency required for luxury perfumery.
- Exclusive Decoration: Enhance your custom mold with frosting, silk-screening, hot stamping, or color coating—all handled within our integrated facility.
Internal Knowledge Base
To better understand our manufacturing standards, explore our technical guides:
- [Eliminating Perfume Evaporation: The Role of Precision Neck Tolerances]
- [Perfume Bottle Sealing Engineering: Snap-On vs. Screw-Top]
- [Perfume Bottle Manufacturers: Solving Pump Leakage in 2026]
Ready to Order Samples?
Verify our glass clarity and neck precision in your own lab.
Tags: perfume bottle manufacturerCapacity and filling specification
| Listed capacity | Approximate US fl oz |
|---|---|
| 50 ml | 1.69 US fl oz |
The capacity shown above belongs to this product reference. Request other sizes as a separate confirmation; a similar silhouette does not establish a shared mold family.
Confirm the target filling point, headspace and brimful capacity on the drawing. Your filler and fragrance formula determine the working fill requirement.
Ordering this perfume bottle: MOQ, lead time and samples
Order planning for this design, from sample approval to shipment.
Pallet or container
Existing-mold orders can begin with one pallet without new-tooling minimums. Custom extra-flint molds start at 12,000 pieces. Decoration and component quantities are listed separately in the quotation.
15–20 days
For confirmed existing-mold orders, allow 15–20 days after sample approval. Custom tooling adds approximately 30–45 days from drawing approval; the agreed project schedule identifies each milestone.
On request
Evaluate glass with its matched pump, collar, dip tube and cap. For custom development, an acrylic model is approximately US$500 and takes around 10 days. Sample tooling takes approximately 35 days and supplies 5–10 trial bottles.
EXW · FOB
Request an EXW or FOB quotation and a freight estimate to your nominated port. Consolidation and mixed-container packing can be discussed with the order.
Your quote lists carton dimensions and estimated 20GP and 40HC quantities. Inserts, bottle shape and protective packing affect loading, so capacity alone is not a freight calculation.
Decorate a running design—or develop your own.
Use frosting, coating, screen printing, hot stamping or labeling to adapt existing glass. Artwork placement, color samples and the decoration charge are reviewed beside the bottle price. Coordinate finishing with the glass schedule and confirm the final delivery date with the approved sample.
US$500
≈ 10 daysApproximately US$500 · around 10 days. Review the external shape and proportions before tooling.
US$1,200
≈ 35 daysApproximately US$1,200 · around 35 days. Review 5–10 glass samples and approve the complete assembly.
US$1,200–2,200
Approximately US$1,200–2,200. Final tooling cost follows the approved geometry and production specification.
Questions before ordering
Which pump and cap fit this bottle?
Use the listed neck specification and final finish drawing to select the closure. Send an existing sprayer sample or drawing; approve the assembled bottle, gasket, tube and cap together.
Can I order a smaller or larger size?
Ask about the capacities listed for this reference or available related designs. Additional sizes are confirmed individually and may require separate molds.
What is the minimum order?
Existing-mold supply can begin with a pallet. Custom extra-flint tooling starts at 12,000 pieces. The quotation confirms quantities for decoration, pumps and caps.
Can I approve samples before production?
Yes, request the glass and proposed components as an assembly. Production follows sample and specification approval.
What documents can I request?
Tell us the destination market and required material or testing documents. Perfume packaging suitability and any food-contact requirement must be confirmed for the exact product; they are not implied by appearance.
Complete your perfume pack.
Explore components for your selection. Final fit is confirmed against the bottle neck, pump and cap drawings.
Request pricing for 50ml Round Glass Perfume Bottle
Send your quantity, preferred finish and destination port. We will prepare an itemized quotation and confirm the drawings and components for your selection.
sales@stdglass.com